NAME "Device::Chip::ADT7470" - chip driver for an ADT7470 SYNOPSIS use Device::Chip::ADT7470; my $chip = Device::Chip::ADT7470->new; $chip->mount( Device::Chip::Adapter::...->new )->get; printf "Current fan 1 speed is %d rpm\n", $chip->read_fan_rpm( 1 )->get; DESCRIPTION This Device::Chip subclass provides specific communication to a Analog Devices ADT7470 attached to a computer via an I²C adapter. Only a subset of the chip's capabilities are currently accessible through this driver. The reader is presumed to be familiar with the general operation of this chip; the documentation here will not attempt to explain or define chip-specific concepts or features, only the use of this module to access them. MOUNT PARAMETERS addr The I²C address of the device. Can be specified in decimal, octal or hex with leading 0 or "0x" prefixes. METHODS The following methods documented with a trailing call to "->get" return Future instances. read_config $config = $chip->read_config->get Returns a "HASH" reference of the contents of the user register. STRT => 0 | 1 TODIS => 0 | 1 LOCK => 0 | 1 (power cycle to unlock) FST_TCH => 0 | 1 HF_LF => 0 | 1 T05_STB => 0 | 1 change_config $chip->change_config( %config )->get Changes the configuration. Any field names not mentioned will be preserved. read_duty $duty = $chip->read_duty( $fan )->get Returns the pwm duty cycle for the specified fan (1-4). read_duty_percent $duty = $chip->read_duty_percent( $fan )->get Returns the pwm duty cycle as a percentage for the specified fan (1-4). write_duty $duty = $chip->write_duty( $fan, $duty )->get Writes the pwm duty cycle for the specified fan. write_duty_percent $duty = $chip->write_duty_percent( $fan, $percent )->get Writes the pwm duty cycle as a percentage for the specified fan. read_fan_rpm $rpm = $chip->read_fan_rpm( $fan )->get Read the fan rpm for the specified fan.